TC Series Hydraulic Compactors




 


Vibratory Compactors for soil or material compaction in trenching, street repair and site preparation.

The TC Series delivers high impulse energy for greater compaction. Rubber isolators, front and rear, are in compression, not shear, providing longer life and lower maintenance cost. Other features include variable impulse force and integral swivel mount that allows more coverage without repositioning carrier.BTI compactors are designed to mount on mini-excavators, backhoes and excavators.

BTI compactors combine centrifical force, down pressure, and vibration to work as soil compactors or pile/sheet drivers.

The compactor has 3 basic components:

  • Mounting Bracket: attaches the compactor to the carrier boom and is complete with adjustable mounting pins.
  • Rubber Isolators: act as suspension between the base and the mount & isolate the compactor forces from the carrier.
  • Base: includes a hydraulic motor coupled to an eccentric, encased in a steel housing with the base plate attached.

Features & Benefits:

High Performance, Low Maintenance:

The motor design requires minimal oil flow leaving sufficient oil for effective boom movement. Optional high or low flow motor configurations allow you to match the motor to your specific hydraulic requirements. Flow control valves, standard on the TC51 and optional on the TC71, protect the rotating group from over-speeding, ensuring optimum operating speeds by returning excess flow to the tank. High frequency operation and high ground pressure are standard to achieve maximum proctor densities and high lifts. Internal anti-cavitation valves permit the motor to slow down safely after shutting off the control valve, eliminating shock loading to the rotating group.

Oil Bath Lubrication:

Oil bath lubrication ensures continuous bearing lubrication and eliminates the need for manual greasing.

Rubber Isolators:

Large rubber isolators prevent vibration in the upper structure, delivering maximum energy through the base plate and into the soil, providing excellent proctor densities. The TC92 and TC152 lattice design places the isolators in compression not in shear. This extreme duty lattice design excels in continuous compacting applications, helping to resist extreme downward force while providing optimum dampening.

Bracket Options:

Mounting brackets range in variety of configurations, including dedicated, swivel and variable pin center (QA), to meet most interface requirements.

Swivel Top Mounts:

Swivel top mounts are available on the TC71, TC92 and TC152 compactors. Controlled compaction is achieved by locking the swivel mount in different positions of 45 degree increments. By removing the pin, the compactor can “free float”.

Universial Adjustable Boss:

Both the QA Swivel and QA Non-swivel mounts come with BTI’s unique adjustable boss mounting system which allows adjustment of the pin spacing to accommodate quick-coupler installations on most common rubber tire backhoes.


General Specifications

 

Units

TC51-L/FC

TC51-H/FC

TC71

TC71/FC

TC92

TC152-L

TC152-H

TC301-L

TC301-H

Minimum Carrier Size lbs
kg
2,000
907
2,000
907
5,500
2,494
5,500
2,494
7,700
3,492
15,400
6,984
15,400
6,984
14,500
6,576
14,500
6,576
Maximum Carrier Size lbs
kg
10,000
4,535
10,000
4,535
15,500
7,029
15,500
7,029
25,300
11,474
48,400
21,950
48,400
21,950
105,600
47,891
105,600
47,891
Operating Weight * lbs
kg
295
134
295
134
610
277
610
277
1,130
512
1,820
825
1,825
828
2,150
975
2,150
975
Impulse Force @ Min. RPM lbs
kg
1,930
875
1,930
875
2,600
1,179
2,600
1,179
5,500
2,494
11,130
5,048
11,130
5,048
16,330
7,405
16,330
7,405
Impulse Force @ Max. RPM lbs
kg
3,000
1,361
3,000
1,361
5,000
2,268
5,000
2,268
8,200
3,719
16,630
7,542
16,630
7,542
24,400
11,066
24,400
11,066
Ground Pressure @ Min. RPM psi
bar
7
0.48
7
0.48
7
0.48
7
0.48
9.2
0.63
11.2
0.77
11.2
0.77
13.4
0.92
13.4
0.92
Ground Pressure @ Max. RPM psi
bar
0.75
7.2
0.75
7.2
0.94
11.7
0.94
11.7
0.94
11.7
1.15
26.7
1.15
26.7
1.38
37.4
1.38
37.4
Minimum Flow Rate US gpm
lpm
7.2
27.2
10.7
40.4
11.7
44.2
11.7
44.2
20.6
77.9
26.7
100.9
37.4
141.4
37.4
141.4
53.5
202.2
Maximum Flow Rate US gpm
lpm
12
45.4
18
68.0
16.3
61.6
22
83.2
25.2
95.3
32.7
123.6
45.7
172.7
45.7
172.7
65.3
248.8
RPM @ Minimum Flow RPM 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800
RPM @ Maximum Flow RPM 2,240 2,240 2,500 2,500 2,200 2,200 2,200 2,200 2,200
Operating Pressure @ Min. Flow ** psi
bar
920
63
700
48
820
57
920
63
970
67
1,600
110
1,190
82
1,480
102
1,080
74
Operating Pressure @ Max. Flow ** psi
bar
1,135
78
860
59
1,130
78
1,230
85
1,200
83
1,964
135
1,460
101
1,820
126
1,330
92
Maximum Relief Valve Setting psi
bar
2,800
193
2,800
193
2,800
193
2,800
193
2,800
193
2,800
193
2,800
193
2,800
193
2,300
159

All dimensions and specifications are approximate and subject to change without notice.

About Breaker Technology

Milton Quarry Testimonial

Hydraulic Wheel Drive

Vibratory Pick Scaling


BTI on Facebook   BTI on Linkedin   BTI Youtube Channel