MS Series Multi-Systems




 






Interchangeable crusher, pulverizer and shears jaws allow tool configurations for just the right application. The BTI MS Series Multi-System works as a second or third member attachment to fit a wide variety of carrier sizes.

Notable features include: interchangeable jaws set, high clamping force, fast cycle times, hydraulic rotation and project cylinders for safety and reliability.

 

Features & Benefits:

Replaceable Teeth:

These ensure maximum penetration and fragmentation while being fast and easy to change in the field.

Fast:

A unique speed valve provides for a faster cycle time than most competitors.

Cutting Blades:

Two replaceable cutters allow reinforced steel to be cut.

Large Diameter Hydraulic Cylinder:

This cylinder provides maximum force and is simple to maintain. No hydraulic intensifier is required.

Ripper Shape Design:

This design allows the operator to easily grab material on the ground or in a pile.

High Quality of Material:

The entire structure, excluding the top mounting bracket, is fabricated from a special steel to provide maximum strength and abrasion resistance. The crushing teeth can be easily built up and hard faced as required.

Fixed Jaw is Open:

This allows material to pass through, increasing production.

The hydraulic pulverizer can be used to demolish concrete floors or low walls. It will provide the following benefits; low noise and vibration, good fragmentation, good separation of steel wire from the concrete material, re-utilization of crushed concrete as aggregate material, recycled steel can be sold to the steel mill industry.


 

General Specifications
 

Units

MS20R

MS30R

MS40R

MS60R

MS130R

Weight of Unit* with: Crusher Jaw Set
Pulverizer Jaw Set
Shear Jaw Set
Combi Cutter Jaw Set
Plate Shear Jaw Set
Recycling Jaw Set
lbs/kg
lbs/kg
lbs/kg
lbs/kg
lbs/kg
lbs/kg
4,950 / 2250
5,071 / 2300
4,960 / 2250
5,071 / 2300
4,7410 2150
5,071 / 2300
6,063 / 2750
6,393 / 2900
6,283 / 2850
6,393 / 2900
5,842 / 2650
6,834 / 3100
10,031 / 4550
10,251 / 4650
10,031 / 4550
10,362 / 4700
9,480 / 4300
-
14,330 / 6500
15.432 / 7000
14,550 / 6600
14,550 / 6600
13,228 / 6000
-
30,865 / 14000
30,865 / 14000
30,865 / 14000
-
-
-
Working Pressure Range psi
bar
4,641 - 5,076
320-350
4,641 - 5,076
320-350
4,641 - 5,076
320-350
4,641 - 5,076
320-350
4,641 - 5,076
320-350
Oil Flow Required gpm
l/min
40-53
150-200
53-66
200-250
66-79
250-300
74-85
280-320
159-212
600-800
Open Time second 2.6 2.4 4.2 6.6 9.96
Close Time second 2.5 2.9 4.3 5.3 3.82
Cycles/min at Maximum Oil Flow cycle 11.8 11.1 7.1 5 4.4
Cylinder Output tonne 110 145 215 247 396
Force at Outer Tip: Crusher Jaw Set
Pulverizer Jaw Set
Shear Jaw Set
Combi Cutter Jaw Set
Plate Shear Jaw Set
Recycling Jaw Set
tonne
tonne
tonne
tonne
tonne
tonne
81
86
80
73
60
85
96
90
95
87
100
91
136
146
142
131
160
-
169
176
166
138
185
-
356
415
417
-
-
-
Force at Centre of Cutter (Shear Jaw) tonne 201 232 352 417 969
Recommended Carrier Weight - 2nd Member tonne 12-18 15-24 24-30 30-50 80-120
Recommended Carrier Weight - 3rd Member tonne 18-25 25-35 35-50 50-75 120-160
             

All dimensions and specifications are approximate and subject to change without notice.

About Breaker Technology

Milton Quarry Testimonial

Hydraulic Wheel Drive

Vibratory Pick Scaling


BTI on Facebook   BTI on Linkedin   BTI Youtube Channel