RP / RP-IT Rotating Hydraulic Pulverizer




 






Engineered for exceptional fragmentation, the RP Series is the perfect tool for secondary demolition and recycling of concrete. High grade steel with special seals keep dust and other debris from pins, ensuring long life and low maintenance.

A high performance cylinder reduces the time needed to open and close jaws, increasing productivity while two replaceable steel bar cutters provide maximum efficiency in cutting rebar.
 
3600 rotating provides optimum operational control and increases overall prouction rates.

 

Features & Benefits:

Replaceable Teeth:

These ensure maximum penetration and fragmentation while being fast and easy to change in the field.

Fast:

A unique speed valve provides for a faster cycle time than most competitors.

Cutting Blades:

Two replaceable cutters allow reinforced steel to be cut.

Continuous Hydraulic Rotation thru 3600:

This allows the attachment to be positioned quickly and accurately, tackling any kind of demolition work.

Ripper Shape Design:

This design allows the operator to easily grab material on the ground or in a pile.

High Quality of Material:

The entire structure, excluding the top mounting bracket, is fabricated from a special steel to provide maximum strength and abrasion resistance. The crushing teeth can be easily built up and hard faced as required.

Fixed Jaw is Open:

This allows material to pass through, increasing production.

The hydraulic pulverizer can be used to demolish concrete floors or low walls. It will provide the following benefits; low noise and vibration, good fragmentation, good separation of steel wire from the concrete material, re-utilization of crushed concrete as aggregate material, recycled steel can be sold to the steel mill industry.


 

General Specifications

 
 

Units

RP30-IT

 

RP40-IT

RP50-IT

RP80-IT

Weight (includes standard coupler) lbs
kg
331
150
  1,080
490
2,315
1050
4,850
2200
Recommended Carrier Weight lbs
tonne
3,307-8,818
1.5-4
  8,818-22,046
4-10
22,046-39,683
10-18
39,700-55,100
18-25
Working Pressure Range psi
bar
2,901-3,626
200-250
  3,191-4,061
220-280
4,061-4,641
280-320
4,061-4,641
280-320
Oil Flow Required gpm
l/min
8-16
30-60
  21-26
80-100
26-48
100-180
48-58
180-220
Open Time second 2.0   2.4 1.9 2.3
Close Time second 3.1   3.4 3.1 2.3
Maximum Ø of reinforcing stell to be cut * in
mm
0.6
15
  1.0
25
2.0
50
2.2
55
             

All dimensions and specifications are approximate and subject to change without notice.

About Breaker Technology

Milton Quarry Testimonial

Hydraulic Wheel Drive

Vibratory Pick Scaling


BTI on Facebook   BTI on Linkedin   BTI Youtube Channel