TTX Series Rockbreaker Systems

 

NT-340NT-draw-340
 

For the larger stationary crushing plants, BTI has designed and developed the TT/TTX Series Rockbreaker System. This system used in applications where extremely hard rock is present or a large coverage area is required. It can be used for material handling applications.

  • Systems can be equipped with a 4,000 to 10,000 ft-lb class breaker
  • Models available with up to 45 ft Nom. Horizontal Reach (with breaker vertical)

Features & Benefits:

  • High strength steel (bent, 4-plate) construction 65 ksi tensile strength; 50 ksi yield strength for longer service life
  • Reinforced pivot and mounting pin joints from improved durability
  • Hardened steel bushings in pivot joints and larger diameter pivot pins provide reduced bearing pressure and increased service life
  • Thick pedestal base plate – 2.0” (50 mm) for stable mounting – optional concrete installation available
  • Sealed turn-table bearing and gear drive for longer service life
  • Increased cross sectional strength of boom and dipper where high stress is realized
  • Can-bus (IQAN) control technology for more precise control and ramping for improved operation response

Coverage Drawing & Data

General Specifications:

Power Packs:

  • 100 HP motor for BXR50; 125 HP motor for BXR65; 150 HP motor for BXR85, BXR100 and BXR120 for 24/7/365 annual duty requirement
  • Constant HP control provides faster simultaneous boom functions without the need for a larger drive motor
  • High efficient grade main pump drive motor
  • Premium efficient (IEEE841) / Energy efficient main pump drive motor (Optional)
  • Main electric motor altitude acceptance limit: 3,280 ft. (1000 m)
  • High Altitude: motor impeller charge kit > 5,000 ft (1,500 m); and
  • High Altitude: motor altitude deration, provided in 1000 m increments > 3,280 ft. (1000 m) up 16,400 ft. (5000 m) (Optional)
  • Continuous oil circulation valve for high duty & temperature applications (Optional)
  • High/low temperature sensor (Optional)
  • Immersion heater – 2kW (circuit breaker & contactor optional with starter panel) (Optional)
  • Motor Starter panel (100, 125 or 150 HP mounting & wiring also optional)
  • Remote power pack start / stop panel with indicator switches and lamps
  • Air-to-oil cooler with thermostatic control
  • Water-over-oil cooler c/w thermostatic control (Optional)
  • Cold weather conversion kit (with dual immersion heaters, heat tape, etc.)
  • 15 ft. (4.6 m) Supply hoses –optional longer lengths up to 25 ft. (7.6 m) (Optional)

Grease Systems:

  • (2-grease system: moly / lithium for boom, chisel past for hammer):
  • Individual / point-to-point manual greasing of boom and hammer
  • Manual-Centralized Grease system; Hydraulic auto lubrication system (Optional)
  • Pneumatic auto lubrication system (Optional)

Control Systems:

  • IQAN (can-bus) stand mounted joystick controller package w/ PP on/off provision
  • < 328 ft. (100 m) remote control cable (IQAN)
  • RTD measures oil temp., controls cooler, heater and temperature shutdown
  • IQAN override handles for mechanical positioning (installation & maintenance) (Optional)
  • Hand-held Radio Remote (transmitter-receiver) joystick controller package (Optional)
  • < 328 ft. (100 m) control distance / signal strength (radio remote) (Optional)
  • Secondary stand mounted controls (Optional)
  • < 1,500 ft. (457 m) coaxial cable – central control c/w pan-zoom cameras (Optional)
  • < 7 mi. (11.26 km) fiber optic cable – central control cw pan-zoom cameras (Optional)


Other Option Specifications:
  • Counter-balance valve package (Optional)
  • Anti-Lunge provision (Optional)
  • Anti-Blank fire provision (Optional)
  • Fire suppression system (Ansul: manual, “Automan” or “Check-fire”) (Optional)
  • Hammer blunt tool – (optional choice of chisel or moil)
  • Hammer severe duty wear kit with rock claws (separate claws also optional) (Optional)



TTX ROCKBREAKER SYSTEMS OPERATING WEIGHTS & DIMENSIONS

Boom Model

Operating Weight
(Boom Only)

lbs (kg)

Operating Weight
(Complete System)

lbs (kg)

Length x Width*

in (cm)

Working Length**

in (cm)

Base (LxW)

in (cm)

Breaker Model
Range

TTX30

41,357
(18,756)
45,557 to 50,407
(20,661 to 22,860)
416 x 72
(1,057 x 183)
368
(934)
96.8 x 72
(246 x 183)
BX50 thru BXR120

TTX36

43,394
(19,680)
47,594 to 51,194
(21,585 to 23,217)
472 x 72
(1,199 x 183)
427
(1,085)
96.8 x 72
(246 x 183)
BX50 thru BXR100

TTX40

44,952
(20,386)
49,152 to 51,452
(22,291 to 23,334)
528 x 72
(1,341 x 183)
530
(1,346)
96.8 x 72
(246 x 183)
BX50 thru BXR85

TTX45

46,260
(20,980)

50,460 to 52,760
(22,884 to 23,927)

571 x 72
(1,450 183)
530
(1,346)
96.8 x 72
(246 x 183)
BX50 thru BXR85

* less hammer
** swing pivot to dipper stick / hammer mounting pin (on-center) dimension

 

 

BTI Mine Runner

Milton Quarry Testimonial

Hydraulic Wheel Drive

Vibratory Pick Scaling


BTI on Facebook   BTI on Linkedin   BTI Youtube Channel